Interior view of a sewing factory floor with rows of sewing machines

Production & Quality

Production & Quality Management

We standardize inspection items and documentation methods per process to ensure quality consistency between samples and mass production.

Process

Production Flow

From inquiry to shipment, we proceed through 8 stages. Confirmation criteria for each stage are shared internally as standard operating procedures.

  1. Inquire & Specifications Confirmation

    We will review your design drawings, specifications, and desired quantity to provide you with a quote.

  2. Sample Production

    After fabric procurement, produce the first sample for your review of dimensions and sewing specifications.

  3. Place Production Order

    After sample approval, confirm the order. We will share the production plan and delivery schedule with you.

  4. Ordering of raw materials and auxiliary supplies

    Order raw materials and auxiliary supplies. Upon receipt, inspect appearance, width, weight per unit area, and color.

  5. Cut

    Mark patterns with shrinkage included; for patterned fabrics and denim, verify pitch and direction before cutting.

  6. Sewing

    After forming the line, proceed with sewing while conducting in-process inspection rounds.

  7. Finishing & Inspection

    After pressing, we conduct 100% inspection—including appearance, dimensions, and needle detection—to identify and sort defects.

  8. Packaging & Shipping

    We will pack according to your specified packaging requirements, prepare all necessary documents, and ship the order.

Quality Control

Three-Stage Inspection System

We verify materials at three stages: upon receipt, during production, and before shipment.

Receiving Inspection for Raw Materials and Subordinate Supplies

Receiving Inspection for Raw Materials and Subordinate Supplies

Verify readiness for mass production upon arrival at the factory.

  • Verify appearance, width, weight, and color
  • Washing Shrinkage and Color Fastness Testing (Focus on Denim and Washed Products)
  • Verify specifications and quantity of sub-materials
On-site inspection

On-site inspection

Stop defects during sewing and do not pass them to downstream processes.

  • Standardize work procedures through initial product verification
  • Verify dimensions and seam allowances for each project.
  • Verify shirt pattern matching and denim stitch width.
100% inspection before shipment

100% inspection before shipment

Inspect all items for shipment: verify appearance, dimensions, and weight.

  • 100% visual and finish inspection
  • Verify actual measurements against specifications
  • Verify metal response using the inspection meter

Equipment

Equipment and Inspection System

Configure lines according to product type, and calibrate inspection equipment before starting operations.

Sewing Equipment
Single needle 60, double needle 15, overlock 10, interlock 5
Line-up designed for shirts, dresses, denim, and pants.
Cutting Equipment
Automatic Cutting Machine 8 units / Manual Cutting Table
For handles, measure pitch; for denim, mark after verifying part orientation.
Finishing & Post-processing
Door stopper: 6 units, vacuum cleaner: 4 units
Complete thread trimming and reinforcement stitching within the post-press process.
Inspection Equipment
Inspection Machine & Inspection Table
Calibrate sensitivity with a test piece at startup
Sample Setup
Sample Fabric Proposal Room from Original Yarn
Align specifications with the prototype stage to minimize deviations from mass production.

Assurance

Inspection & Document Handling

We also support third-party inspection oversight and issuance of export documentation.

  • Three-Stage Internal Inspection

    Recorded implementation of incoming inspection, in-process巡回 inspection, and 100% pre-shipment inspection.

  • Third-party inspection

    Inspection can be conducted in the presence of your designated inspection agency.

  • Output Documents

    Supports issuance of invoices, packing lists, and certificates of origin.

  • Sample Fabric Proposal

    Direct management and production of sample fabrics from original yarn

※ The number of equipment units shown is an example of major equipment. For detailed information on inspection and document handling, we will provide a customized proposal based on your specific requirements.

Factory

Factory Scenery

This is the site for cutting, sewing, inspection, and shipping processes.

Fabrics stacked on the cutting station workbench
Cutting Engineering
Factory scene of a sewing line with rows of sewing machines.
Sewing line
Pre-shipment verification using the inspection machine
Meter Reading Works
Warehouse with packed cartons lined up, awaiting shipment
Packaging & Shipping

Factory tours and sample requests accepted.

You can tour our actual production line or request sample manufacturing to your specified requirements.

Contact Us